LYNXEYE XE Detector User Manual
DOC-M88-EXX240 V1 – 03.2014 6-7
Figure 6.7: Selecting DETECTOR Plugin for Veto Discrimination
Figure 6.8: Selecting Mode and Gain for Veto Discrimination
Select Mode and Gain as required for your application. Keep shutter closed for starting the calibration.
Figure 6.9: Starting calibration for Veto Discrimination
Select ‘Calibrate Detector’ to determine new values or ‘Qualify Calibration’ to check the actual ones.
The calibration will take several minutes. Result shall be at least ‘Satisfactory’.
To Next Page
Loading...