11
• To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the
feature you wish to change.
• Use the Up (Y) and Down (B) buttons to make the appropriate
changes.
• When you have completed all of the settings, touch SAVE.
• If you make a mistake you may touch CANCEL and begin again.
3.3. Adjust Temperature (Temporary Hold)
The Evolution Connex Control allows you to temporarily override your
programmed schedule by adjusting the indoor temperature at any time to
meet your needs.
NOTE: The Evolution System may seem slow to react to set point,
activity and system mode changes. This is normal, as the system will
ramp up capacity and fan speeds slowly to achieve the proper level of
home conditioning, while avoiding wasting energy, stressing home
circuits and dimming lights with a ”hard start.”
3.4. Adjusting Comfort Activities (See Comfort
Profiles on page 18)
• To adjust the comfort activity, enter the Main Screen by touching
anywhere on the Control.
• Touch the activity/top button under the Touch ’N’ Go® feature on the
left side of the screen; then select the desired activity of HOME,
AWAY, SLEEP, or WAKE.
• Use the Up (Y) and Down (B) buttons to change the time to
temporarily hold the desired temperature in 15 minute increments.
• When the correct time interval is displayed, touch DONE.
• To return to the scheduled program, touch HOLD UNTIL, and then
select PER SCHEDULE.
To Next Page
Loading...
