Bryant Evolution Connex SYSTXBBWEC01-C - Adjust Temperature (Permanent Hold); Adjusting Comfort Activities (See Comfort Profiles; Adjusting Heating

13
• To return to the scheduled program, touch HOLD UNTIL, and then
select PER SCHEDULE.
3.7. Adjust Temperature (Permanent Hold)
The Evolution Connex Control allows you to permanently override your
programmed schedule by adjusting the indoor temperature at any time to
meet your needs.
3.8. Adjusting Comfort Activities (See Comfort
Profiles on page 18)
• To adjust the comfort activity, enter the Main Screen by touching
anywhere on the Control.
• Touch the activity under the Touch ’N’ Go® feature on the left side of
the screen; then select the desired activity of HOME, AWAY, SLEEP,
or WAKE.
• Touch the HOLD UNTIL button, then touch HOLD.
• To return to the scheduled program touch HOLD, and then touch PER
SCHEDULE.
3.9. Adjusting Heating
• To adjust the heating temperature, enter the Main Screen by touching
anywhere on the Control.
• With the system in either AUTO or HEAT mode, use the Up (Y) and
Down (B) buttons to set the desired temperature.
• On the left hand side of the screen, the comfort profile will switch to
MANUAL.
• Touch the HOLD UNTIL button, then touch HOLD.
• To return to the scheduled program, touch HOLD, and then touch
PER SCHEDULE.