7
displayed. A red “X” over the bars indicates no connection to the home
Wi-Fi network.
A170246
• Pressing on the Connectivity Status bars from the Home Screen will
allow you to view the Remote Access Status screen.
A240301B
NOTE: If the Evolution Connex Control is not connected to the home
network, a red “X” will appear over the strength bars. If the Evolution
Connex Control is connected to the home Wi-Fi network but loses
connection to the MyEvolution Server, a triangle will appear over the
strength bars as depicted in the image below. Connection strength to the
home Wi-Fi network will continue to be displayed by the number of solid
bars. If this problem persists, please contact 1-800-428-4326 for
assistance.
Strong Connection
Limited Connection Poor Connection
No Connection
To Next Page
Loading...
