1.2- Technical specifications
Equipment
Chlorine
production
g/hour
Common features in all PRO equipment
Adjustment of chlorine production by switched mode power supply
Power supply performance >90%
Automatic switch-off owing to lack of water flow
Automatic voltage adjustment depending on the concentration of salt and the temperature, keeping
continuous chlorine production.
Automatic cleaning cycle of electrodes.
Automatic restart in the event of supply failure.
1.3- Recommendations and safety precautions
The equipment should always be installed by qualified staff.
Disconnect the equipment from the mains before performing any assembly or maintenance operation.
Make sure that the electrical installation has all compulsory protection elements (circuit breaker and
differential switch) in perfect condition.
It is important to ensure that the supply cables of the electrolysis cell are tightly connected,
otherwise the equipment could overheat and break down.
To Next Page
Loading...
