BSV PRO50 - Chemical Balance of the Water

42 / 72
Manual PRO50-150 V.6
2.2 Chemical balance of the water
The effectiveness of chlorination and the quality of water for healthy bathing, depends largely on the pH
of the water. Therefore, it should be checked regularly and adjusted as necessary.
There are other parameters which should be considered for the correct operation of the salt water
chlorinator. We recommend an in-depth analysis of the water when installing a salt water chlorinator.
Parameter
Minimum Value
Maximum Value
PH
7.0
7.8
FREE CHLORINE (mg/l)
0.5
2.5
COMBINED CHLORINE (mg/l)
--
0.6
TOTAL BROMIDE (mg/l)
3.0
6.0
BIGUANIDE (mg/l)
25
50
ISOCYANURIC ACID (mg/l)
--
<75
OZONE (GLASS) (mg/l)
--
0
OZONE (before)
0.4
--
TURBIDITY (NTU)
--
<1
OXIDES (mg/l)
--
<3
NITRATES (mg/l)
--
<20
AMMONIA (mg/l)
--
<0.3
IRON (mg/l)
--
<0.3
COPPER (mg/l)
--
<1.5
ALKALINITY (mg/l)
100
160
CONDUCTIVITY (us/cm)
--
<1700
TDS (mg/l)
--
<1000
HARDNESS (mg/l)
150
250