Incrustations or objects in
the electrolysis cell causing
excess current.
The chlorinator is in the self-
cleaning process. The process
lasts 5 minutes
The ambient temperature is
>40º
Try and place the equipment in
another position where it is not over
40º or perform forced ventilation.
Leave the equipment to rest
minutes.
The radiator fins are
obstructed or are not in a
vertical position.
Place the equipment so that air is
circulated for correct cooling.
4.2.1.1- Additional warning messages
The redox or free chlorine
probe are balanced in
automatic mode. When the
is balanced, the value
remains set.
is balancing.
When the probe is
balanced, the value remains
set.
Value ---o (Water
temperature) is
flashing
The value of the water
temperature
is under
Consider the use of a
winter
hibernator product.
The equipment has
switched off before
the
set in semi-
Restart the filtering cycle
To Next Page
Loading...
