BT BT2600 - Do Not Disturb Feature; Understanding Do Not Disturb; Enabling and Disabling Do Not Disturb

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Using the phone 23
When set to On, the idle screen
will display Do Not Disturb.
Call control and the Do not disturb feature
The Do not disturb feature allows calls to be
presented silently with minimal notification. When
set to On, the base and handset ringer volumes
(on all handsets registered to the base) will be set
to Off. The handset backlight will not come on
when the phone rings and the only tones that the
handset will emit are the battery low and out of
range warnings. The base call screening volume and
message alert will also be set to Off.
Turn Do not disturb on or off
1. From the standby screen, press the
button to
turn On or Off. The current setting will be displayed
and you will hear a confirmation tone.
Or, using the menu:
1. Select
Menu , scroll to Do Not Disturb and
press
.
2. Press
or to select On or Off then press to
save. The chosen setting will be displayed and you
will hear a confirmation tone.