BT BT2600 - Handset Settings: Tones and Controls; Controlling Handset Tones

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Settings 51
There are two handset tones:
keypad tones and confirmation
tones. You can turn these on or
off, the default setting is On.
Keypad tones: when turned on,
you will hear a beep after each
button press.
Confirmation tones: when
turned on, you will hear a tone
after each successful action
or after an error has occurred.
This does not include the
battery charging tone when the
handset is placed on the base/
charger, low battery or out of
range warnings or tones used in
calls such as Call Waiting or Call
Intercept.
4. The current external ringtone will play at the
current volume. Use the
or button to increase
or decrease the volume, or turn the ringer off.
You will see the volume level change on the display
or
Ringer Off will be displayed if you turn the
ringer off.
5. Press
to save your choice. Saved will be
displayed and you will hear a confirmation tone.
Turn the handset tones on or off
1. Select
Menu , scroll to Settings and press .
2.
Sounds is displayed, press . Press until
Handset To n e s is displayed and press .
3.
Keypad To n e s is displayed, press or press to
display
Confirmation To n e s and then press .
4. Press
or to select On or Off then press to
save.
Saved will be displayed and you will hear a
confirmation tone (if set to on).