Call control settings
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
40
Assign VIPs
You can set whether calls from VIPs will still be allowed to ring or not when the
Do not disturb feature is turned on. The default setting is Allowed. If set to Not
Allowed all calls will be presented silently. If set to Allowed calls from VIPs will
ring as normal.
1. Select Menu, scroll
to Call control and press Select.
2. Enter the access PIN and select OK. Press
to highlight VIP list and press OK.
3. Read the prompt and select Info, read the message and select Yes at the end.
Your contacts list will be displayed.
4. To assign contacts as VIP, highlight the contact and press
. Select additional
contacts if required by repeating above.
5. Select Options, Add selected will be highlighted, press Select and the selected
entries will be added to your VIP list.
If you’ve already added contacts to your VIP’s, the list will be displayed when
you enter the VIP list menu. You can then select Options to add further VIPs,
remove VIPs or assign a VIP ringtone.
To Next Page
Loading...
Need help?
General
