If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Settings 55
Settings
To change any Base settings
1. Firstly, select Menu, scroll to display Settings and press Select.
Then choose the base setting you want to change from the options below:
Base ringtone melody and volume
Choose from five base ringtones. The default is Melody 1. There are five base
ringer volume levels plus Ringer Off. The default is Level 3.
2. Press
to highlight Base settings, press Select.
3. Ringing is highlighted, press Select.
4. Press
or to select the ringtone melody, then press to select the volume
level you want and select Save.
PBX access code
If you’re connected to a switchboard, you might need to enter an access code
(e.g. 9) before you dial a number. Your BT8500 can store an access code which
is automatically dialled before each number. We cannot guarantee that all the
BT8500 features will work when connected to a PBX.
2. Press
to highlight Base settings, press Select.
3. Press
to highlight PBX code, press Select. Enter the number you want
(maximum four digits). If you wish to stop using a PBX access code, go into the
PBX code menu and delete all the digits by selecting Clear, then select Save.
To Next Page
Loading...
Need help?
General
