If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Answer machine 51
Remote access
With remote access you can operate your answer machine from any Touchtone™
phone, even if you forget to turn on your answer machine before you go out.
You need to set a remote access PIN first and then you will need to turn remote access
On if you want to use this feature. The PIN is also used for the Call Control PIN.
Set the remote access PIN for the first time
1. Select Menu, Answer Phone is displayed, press Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight Remote access and press Select.
4. Read the message prompt, press
to read it all, then select Set PIN.
5. Enter a 4 digit PIN of your choice and select OK.
6. Enter the 4 digit PIN again to confirm and select OK. The display will show Access
PIN saved.
Change the remote access PIN
1. Select Menu, Answer Phone is displayed, press Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight Remote access and press Select.
4. Press
to highlight Change PIN and press Select. You will be reminded that
the access PIN is used for both remote access and call control.
5. Enter your old 4 digit PIN and select OK.
6. Enter the new 4 digit PIN, select OK, then enter the new PIN again and select OK.
The display will show New Access PIN saved.
To Next Page
Loading...
Need help?
General
