VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Battery
Before attaching or removing the battery make sure your radio is turned off by turning
the power/volume knob all the way counter-clockwise.
Installation
Make sure the battery is aligned in parallel with the radio body with
the lower edge of the battery about 1-2cm below the edge of the
radio. Once aligned with the guide-rails, slide the battery upward
until you hear a click as the battery locks in place.
Removal
To remove the battery: press the battery release on the bottom of the battery pack as
you slide the battery downward.
To Next Page
Loading...
