VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
Radio Menu Settings
FM Radio
Press the menu key to enter the menu, turn on the FM radio, and press the up key to scan the available
frequencies up.
Press the down key to scan down the available frequencies, press the [OK] button to exit the radio
mode Signaling
ID: Your Name ID
Send ID: Allow sending your ID to your partners.
Position: Allow sending your current location to partners
Allow Check: Allow your partner to send instructions to check your current location, and your location
will be feedback to the partner's device.
Send Message: Send text message to partners (Channel 23 - Channel 30 prohibit sending data packets)
Call: When the receiving device receives the CALL command, the radio will ring, please enter the ID to
be searched
Check: When the receiving device receives the CHECK command, the radio will feed back the current
location, this option requires the receivers ALLOW CHECK to be effective, please enter the ID to be
searched
Nearby People: This option sends the CHECK command on the current frequency, and all radios on the
same frequency will feedback their current position after receiving the command. This option requires
the receiver(s) ALLOW CHECK to be active
To Next Page
Loading...
