BTECH GMRS-PRO - NOAA Weather Channels; WX Scan and Alert Activation; Reset Procedure; Restoring Factory Settings

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
53
NOAA Weather Channels
[WX Scan]: Turns on weather scan, the device will always be in the scan state until it finds a
signal
[WX Alert]: Turn on this option, and when the NOAA weather warning message is received,
the device will sound an alarm, and the weather message will be heard. During
the alarm state, you can press any key to mute the alarm message, and the
alarm state will be released after 3 minutes. Refer to next page for description
of NOAA WX Alerts.
Reset Procedure
In standby mode, press and hold the top button (P1) and the button (P2) below the PTT at the same
time to restore the factory settings. Remember to backup all data and settings before performing a
reset. This will remove all settings entered by the user.
WX Channels
1
162.550MHz
5
162.450MHz
1
162.400MHz
6
162.500MHz
3
162.475MHz
7
162.525MHz
4
162.425MHz