[Microphone Gain]: Set the microphone gain of the internal
microphone.
[Wireless Mic Gain]: Set the microphone gain of the wireless
microphone.
[Headphone Mode]: Set the access mode of the headphone
system (voice mode or call (phone) mode).
[Keep Headset Connected]: Select the continuous connection
and operation via the headset
[Tone]: Turn on/off the beep tone on the device.
[Power Saving Mode]: Turn on/off the power saving mode.
[Reset Settings]: This will reset all user settings- back up
settings before performing this.
[Factory Data Reset]: This function will restore all the data of
the radio to the factory settings. Please back up data such as
frequency and channels before performing this operation
To Next Page
Loading...
