BÜCHI Labortechnik AG
www.buchi.com
ii
Important Safety Guidelines for the Model 3300 ELSD
Please read the following cautions and warning statements carefully before
using the Model 3300 ELSD:
• The equipment must be used as specified by the manufacturer otherwise
overall safety will be impaired.
• All service must be completed by qualified personnel only.
• Only use the power supply cord recommended by the manufacturer.
• Fire hazard, only use the same type and rated CERTIFIED fuse
(
250V 5A F).
• Shock hazard, disconnect power before replacing the fuse.
• Remove power cord from the power module to disconnect electrical power
from the unit.
• Check the MSDS forms and dispense and dispose of all reagents in
accordance with local and national regulations.
• Be sure to provide proper ventilation for all solvent vapors.
• Avoid open flames and sparks when using flammable solvents.
• If the unit is damaged and does not function properly, stop the unit safely
and contact the manufacturer immediately.
• Class 3B LASER radiation inside can cause severe eye damage. Do not
open or defeat interlocks. Avoid exposure to the beam.
To Next Page
Loading...
Need help?
General