Buchi SyncorePlus - Connecting the Coolant to the Condenser; Connecting the Vacuum Pump to the Condenser; Connecting the Vacuum Hose for the Heater Cover

BÜCHI Labortechnik AG Installation | 5
Operation Manual SyncorePlus 23/56
5.6.2 Connecting the coolant to the condenser
u Install the coolant hoses onto the hose nip-
ples.
u Attach the coolant hoses in place with a hose
clip.
u Attach the prepared coolant hoses onto the
condenser.
5.6.3 Connecting the vacuum pump to the condenser
u Install the vacuum hose onto the hose nipple.
u Attach the prepared vacuum hose onto the
condenser.
5.6.4 Connecting the vacuum hose for the heater cover
u Attach the vacuum hose from the heater cover
to the vacuum adapter.