Buchi SyncorePlus - Operating the Instrument; Control Panel and Status Display

BÜCHI Labortechnik AG Operation | 7
Operation Manual SyncorePlus 35/56
7 Operation
7.1 Operating the control panel
7.1.1 Layout of the control panel
CAUTION
Risk of injury from glass splinters
Sharp objects can damage the display.
u Keep sharp objects away from the display.
2
4
5
6
1
3
7
8
9
10
Fig.8: Layout of the display
1 According to the current operation:
 Set temperature heater cover
 Offset temperature between heater
cover and heater base
2 Actual temperature heater cover
3 According to the current operation:
 Set temperature heater base
4 Actual temperature heater base
5 Status panel
See Chapter7.1.2 "Status panel",
page35
6 According to the current operation:
 Rotation speed
 Error code See Chapter9.2 "Error
messages", page43
7 Button STOP 8 Icon Lock
9 Navigation control 10 Button SET
7.1.2 Status panel
The status panel can display the following status:
View Status
START The instrument is ready to start
PAUSE The instrument is carrying out an evaporation
OK Confirm set values
CW A cooling water valve is connected
Cooling water valve activated