Buchi SyncorePlus - 10 Taking out of Service and Disposal; Taking out of Service; Disposal; Returning the Instrument

10 | Taking out of service and disposal BÜCHI Labortechnik AG
46/56 Operation Manual SyncorePlus
10 Taking out of service and disposal
10.1 Taking out of service
u Remove all solvents and coolants.
u Clean the instrument.
u Switch off the instrument and disconnect it from the mains power supply.
u Remove all tubing and communication cables from the device.
10.2 Disposal
The operator is responsible for proper disposal of the instrument.
u When disposing of equipment observe the local regulations and statutory require-
ments regarding waste disposal.
u When disposing, observe the disposal regulations of the materials used. Materials
used see Chapter3.5 "Technical data", page17
10.3 Returning the instrument
Before returning the instrument, contact the BÜCHI Labortechnik AG Service Depart-
ment.
https://www.buchi.com/contact