BÜCHI Labortechnik AG Help with faults | 9
Operation Manual SyncorePlus 45/56
9.3 Changing the fuse
WARNING
Risk of electric shock with connected power supply cable.
Serious injuries or death can result.
u Switch off the device.
u Disconnect the power supply cable from the device.
u Set the On/Off master switch to Off.
u Disconnect the power supply cable from the device.
u Unscrew the fuse carrier (2).
ð Make sure the O-ring on the fuse carrier is not damaged.
u Replace the defective fuse (1).
u Screw in the fuse carrier.
u Connect the power supply cable.
u If the fuse brakes repeatedly contact the Contact BUCHI Customer Service.
To Next Page
Loading...
