Buchi SyncorePlus - Installing the Waste Vessel (SPE Configuration Only)

BÜCHI Labortechnik AG Installation | 5
Operation Manual SyncorePlus 25/56
5.7 Installing the waste vessel (SPE configuration only)
u Assemble the waste bottle.
u Attach the support rod onto the waste bottle.
u Secure the support rod in place with the nut.
NOTICE!Push the hose 3 cm in the waste bot-
tle
u Attach the waste line to the waste bottle.
u Attach the cross sleeve to the support rod.
u Attach the waste vessel to the support rod.