Buchi SyncorePlus - 6 Preparing the Instrument for a Configuration; Preparing a Polyvap Configuration

BÜCHI Labortechnik AG Preparing the instrument for a configuration | 6
Operation Manual SyncorePlus 27/56
6 Preparing the instrument for a configuration
6.1 Preparing a Polyvap configuration
u Make sure that the surface of the heater base
is clean.
u Put the rack on the heater base.
u Make sure that there are no spaces between
rack and heater base.
u Secure the rack in place with the screws on
both sides.
u Fill water into the rack.