34
MA112780_38.6 [Original Instructions] 9/19/2011
Warning Messages
The following Warning Messages will appear on the LCD Screen:
HOOD OPEN
The hood is not fully closed.
Check to see if any specimens or other debris is on the hood ledge.
ARM LIMIT
The IsoMet 5000 has safety switches to limit the blade’s forward and reverse travel. Use the hand crank
to reposition the blade.
BLADE PINCHED
Indicates that during cutting the blade became pinched by the specimen and the cutting operation has
automatically shut off.
Carefully retract the blade and check the specimen fixture.
EMERGENCY STOP
Indicates the Emergency Stop button has been pressed.
1. Examine the machine for problems.
2. Rotate the Emergency Stop button counter-clock wise until it pops out. The IsoMet 5000 will be in the
PAUSE mode.
3. Press the CUTTING CYCLE button to continue operation.
To Next Page
Loading...