Buehler IsoMet 5000 - Safety Terms

3
MA112780_38.6 [Original Instructions] 9/19/2011
Safety Terms
DANGER
!
WARNING
!
CAUTION
!
NOTICE
Unpacking
The IsoMet 5000 Linear Precision Saw is shipped fully assembled and has been carefully packaged to
protect it during transit from the factory to your location. Carefully unpack and check contents. If any
components are missing or damaged, save the packing list and materials and advise the carrier and
Buehler of the discrepancy.
IsoMet 5000 Linear Precision Saw with accessories (Catalog Number 11-2780) is shipped with:
 Automatic Dressing System (11-2696)
 Buehler Recommended Cutting Fluid
 Dressing Stick (11-1190)
 IsoCut
®
7-inch Wafering Blade (11-4267)
 Set of 4-inch Stainless Steel Flanges (11-2689)
 2µm Specimen Positioning System (11-2750)
 3 Specimen Chucks:
11-2684 - 1 ¼-inch Round Specimen Chuck
11-2683 - Single Saddle Chuck
11-2686 - Irregular Specimen Chuck
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury
CAUTION indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE indicates practices not related to personal injury.