2-44 2003 Buell XB9S: Chassis
HOME
6. See Figure 2-64. Move the fork assembly from the hold-
ing tool and compress fork in the FORK SPRING COM-
PRESSION TOOL.
7. See Figure 2-65. Hold damper rod assembly (3) and
remove fork cap (1).
NOTE
Careful not to damage preload pins (2) while holding damper
rod assembly (3).
8. Remove preload washer (4) and slider piston (5).
9. See Figure 2-64. Uncompress fork and remove from
FORK SPRING COMPRESSION TOOL.
Figure 2-64. Fork Spring Compressing Tool (HD-45966)
b1145x1x
Figure 2-65. Holding Damper Rod Assembly
8479
1. Fork cap
2. Preload pins
3. Damper rod assembly
4. Preload washer
5. Slider piston
3
2
1
4
5
To Next Page