Buell 2003XB9S - Mirrors

2-72 2003 Buell XB9S: Chassis
HOME
MIRRORS 2.28
REMOVAL
1. See Figure 2-98. Loosen adjuster nut (2) and remove
mirror (1) from mount (3).
2. Loosen mount (3) and remove from bracket (4).
INSTALLATION
1. Install mount (3) onto bracket (4) and tighten to 20-22 ft-
lbs (27.1-29.8 Nm).
NOTE
Before tightening adjuster nut, position mirrors for rider.
2. Install mirror (1) and tighten adjuster to 115-130 in-lbs
(13-14.7 Nm).
Figure 2-98. Mirrors and Mounting Hardware
1. Mirror
2. Adjuster nut
3. Mount
4. Bracket
1
1
2
3
2
3
4
9990
b1154x2x