2003 Buell XB9S: Engine 3-41
HOME
36. See Figure 3-57. Install sidestand assembly. See 2.43
SIDESTAND ASSEMBLY.
37. Pull wire harness and sidestand switch through from
right side of vehicle.
38. Install sidestand switch to sidestand assembly and install
cable strap.
39. See Figure 3-58. Pull clutch cable back up into the
proper position.
a. Connect clutch cable to handlebars and adjust to
speciļ¬cations. See 3.1 SPECIFICATIONS.
b. Install upper retaining clamp.
Figure 3-57. Sidestand Assembly and Switch with Cable
Strap
8712
Figure 3-58. Clutch Cable Upper Retaining Clamp
To Next Page