Vehicle
Personalization
Some of your vehicle’s features can be reset or
customized according to your preference. The features
you can program depend on the options that came
with your vehicle.
If
your vehicle has a
DIC,
see
DIC Vehicle
Personalization on page
3-59
to customize your
features.
If
you do not have the
DIG,
the following features can
be customized according to the options that your
vehicle has.
Entering Programming Mode
To program features, your vehicle must be in the
programming mode. Follow these steps:
1.
Turn the ignition key to
ON.
The gearshift must be
in PARK
(P).
2.
Press and hold the tripheset button, located next to
the odometer for two seconds while the odometer is
in the odometer mode.
PROGRAM
MODE
United States
Canada
3.
This message will appear in the message center,
located in the instrument panel cluster,
as
an
indication that your vehicle
is
ready to begin
programming.
If
you have the remote keyless entry system,
you must press the LOCK button. This lets
the system know which transmitter is being
personalized, because each can be
personalized differently.
You
can now program your choices.
To exit the programming mode, follow the steps listed
under
Exiting Programming Mode on page
2-56.
2-50
To Next Page
Loading...
Need help?
General
