Plugging the cord into an unground,, outlet
could cause an electrical shock. Also, the
wrong kind
of
extension cord could overheat
and cause a fire. You could be seriously
injured. Plug the cord into a properly grounded
three-prong
11
0-volt AC outlet.
If
the cord
won’t reach, use a heavy-duty three-prong
extension cord rated for at least
15
amps.
4:
Before starting the engine, be sure to unplug and
store the cord as it was before to keep it away
from moving engine parts.
If
you don’t, it could be
damaged.
How
long should you keep the coolant heater plugged
in? The answer depends on the outside temperature, the
kind of
oil you have, and some other things. Instead
ot
trying to
list
everytning nere, we ask inat you coniaci
your dealer in the area where you’ll be parking your
vehicle. The dealer can give you the best advice for that
particular area.
Automatic Transaxle Operation
PRND321
Maximum engine speed is limited when you’re in
PARK (P) or NEUTRAL (N), to protect driveline
components from improper operation.
There are several different positions for your shift lever.
PARK (P):
This gear position locks your front wheels.
It’s the best position to use when you start your
engine because your vehicle can’t move easily.
Ensure the shift lever is fully in PARK (P) before starting
the engine. Your vehicle has an automatic transaxle
shift lock control system. You have to fully
apply
your regular brakes
before
you can shift from PARK (P)
when the ignition key is in RUN. As you step on the
brake pedal, while in PARK (P), you may hear a
click from the solenoid of the system. This ensures that
the
system
is
operating properly.
2-23
To Next Page
Loading...
Need help?
General
