Dolly
Towing
If
you have a two-wheel-drive vehicle, it can be towed
with two of its wheels on the ground. To dolly tow
your vehicle,
do
the following:
1.
Put the front wheels on a dolly.
2.
Put the vehicle
in
PARK (P).
3.
Set the parking brake and then remove the key.
4.
Clamp the steering wheel
in
a straight-ahead
5.
Release the parking brake.
position with a clamping device designed for towing.
If
you have an all-wheel-drive vehicle, it cannot be
towed with any of its wheels on the ground. It can be
towed with car carrier equipment.
Notice;
Towing an all-wheel-drive vehicle with all
four wheels on the ground, or even with only two
of
its wheels on the ground, will damage drivetrain
components. Don’t tow an all-wheel-drive vehicle if
any
of
its wheels will be on the ground.
Loading
Your
Vehicle
GAWR FRT GAWR
RRI
nn
I-=--
I
1
b--
F--J
RIM
COLD TIRE
PRESSURt
on
nn
BEE mNER’S MANUAL FOR ADDITIONAL INFORMATlONr
I
The Certificationrrire label
is
found on the rear edge of
the driver’s door.
The label shows the size of your original tires and the
inflation pressures needed to obtain the gross weight
capacity of your vehicle. This
is
called the Gross Vehicle
Weight Rating (GVWR). The GVWR includes the
weight of the vehicle, all occupants, fuel and cargo.
4-34