EasyManuals Logo

Buick 2003 Rendezvous User Manual

Buick 2003 Rendezvous
468 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #210 background imageLoading...
Page #210 background image
FUEL USED:
The fuel used display will show you how
much fuel has been used since the last time
it
was
reset. To reset the fuel used to zero, press and hold the
SET button while the fuel used is displayed on the
DIC and until the display goes to zero.
AVG
SPEED
(Average
Speed):
The average speed
display will show your average speed from when
you first started your vehicle.
To
reset the average
speed, press and hold the SET button while the average
speed is displayed on the DIC and until the speed
resets to your current speed.
OIL LIFE LEFT HOLD SET
TO
RESET: This message
displays the current percentage of the GM Oil Life
System. Be careful not to reset this display other than
when the
oil
has been changed. See “How to Reset the
System” under
Engine
Oil
on page
5-13
for more
information.
TIRE
PRESSURE:
The check tire pressure system can
alert you to a large change in the pressure of one
tire. You must begin driving before the system will detect
on
page
5-56.
USE SET TO SELECT ENGLISH METRIC:
You can
use this display to select English
or
metric. Press
the SET button to toggle between English or metric. The
DIC, the odometer, the trip odometer and head-up
display will change.
u
.-,
I”””
~1~1
+;*a
,I,
p.‘
nrtxcIIrn
VVVW.
-.
Cna
--
-
/I.hm-?k
-
. .
-
--
.
Tire
Pressr~re
System
OFF:
No
driver information will be displayed in this
mode.
If
the DIC is left
in
this mode for more than three
seconds, the display will turn
off.
Press the MODE
button to start the DIC.
DIC
Vehicle
Personalization
The DIC is used to program the choices of two drivers.
The drivers are recognized as DRIVER
1
or DRIVER
2
in the DIC display. You will let the DIC know which driver
you are by using your remote keyless entry transmitter.
Each remote keyless entry transmitter was
pre-programmed to belong to DRIVER
1
or DRIVER
2.
Each transmitter may be programmed differently for
each driver’s preferences.
After you press the LOCK button on your transmitter
and the ignition key is in
ON,
the DIC will display
the identified driver number. The vehicle will also recall
the vehicle customization features that were last
programmed to correspond to your transmitter.
If
you unlock your vehicle using your key instead of your
vehicle will recall the information from the last transmitter
+-----;*+nr
CI~~~~IIIILLGI,
+hn
CIIU
nlP
YIV
Intill
1~111
nnt
I.V.
phsnnn
-,.-..
dri\/orq
3nd
ynlJr
3.-
-..-
used.
3-59

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buick 2003 Rendezvous and is the answer not in the manual?

Buick 2003 Rendezvous Specifications

General IconGeneral
BrandBuick
Model2003 Rendezvous
CategoryAutomobile
LanguageEnglish

Related product manuals