Securing a Child Restraint Designed
for the LATCH System
1.
Find the anchors for the seating position you want
to
use, where the bottom of the seatback meets the
back
of
the seat cushion.
2.
Put the child restraint on the seat.
3.
Attach the anchor points on the child restraint
to
the
anchors in the vehicle. The child restraint
instructions will show you how.
4.
If
the child restraint is forward-facing, attach the top
strap
to
the top strap anchor. See
Top Strap on
page
1-59.
Tighten the top strap according
to
the child restraint instructions.
5.
Push and pull the child restraint in different
directions
to
be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
1-66
Securing a
Child
Restraint in a Rear
Outside Seat Position
If your child restraint is equipped with the LATCH
system, see
Lower Anchorages and Top Tethers for
Children (LATCH System)
on
page
1-64.
To Next Page
Loading...
Need help?
General
