Changing
a
Flat
Tire
If
a tire goes flat, avoid further tire and wheel damage
by driving slowly
to
a level place. Turn on your
hazard warning flasbrs.
Changin,
d
tire can cause an injury. The
vehicle can slip
off
the jack and roll over you
or other people. You and they could be badly
injured. Find a level place to change your tire.
To
help prevent the vehicle from moving:
1.
Set the parking brake firmly.
2.
Put the shift lever
in
PARK
(P).
3.
Turn
off
the engine.
To be even more certain the vehicle won't
move, you can
put
blocks at the front and
rear
of
the tire farthest away from the one
being changed. That would be the tire on
the other side of the vehicle, at the
opposite end.
The following steps will tell you how to use the jack and
change a tire.
5-67
To Next Page
Loading...
Need help?
General
