Bulb
Replacement
For the type of bulbs, see
Replacement
Bulbs
on
page
5-52.
For any bulb changing procedure not listed in this
section, contact your dealer.
Halogen
Bulbs
Haloger.
--..x
have press-. .zed gas inside
and can burst
if
you drop or scratch the bulb.
You or others could be injured. Be sure to read
and
follow
the instructions on the bulb
package.
Headlamps
1.
Open the hood.
2.
Push in on the headlamp
panel and lift up the
headlamp retaining clip
partway, but do not
remove.
3.
Undo the wing stud on the upper, outboard side of
the lamp assembly.
4.
Unsnap the headlamp assembly by pulling it
5.
Disconnect the electrical connector by pulling back
forward, away from the vehicle.
on the locking tab, located on the electrical
connector,
to
separate the two connectors.
5-48
To Next Page
Loading...
Need help?
General
