Base-Level
4.
For base-level split bench seats, pull the lever at
the base of the seat on the outboard side to
release the rear latches from the floor pins and flip
the seat forward.
forward on the recliner lever to release the
rear latches from the floor pins and flip the seat
forward.
7
1-
.-I
---I!I
L---L
-err+-
rr,,p.h;nn
fUf
Up-level
splli
UGI
ILI
I
acaia,
UUI
1111
IUC~
~UW
ly
The seat can stay in this position or
it
can be
next steps.
;srr;oved
from
the vehic!e
by
fo!!nwing
the
5.
To release the front latches, squeeze the angled
latch release bar toward the straight crossbar.
6. Remove the seat by rocking it slightly toward the
rear of the vehicle and then pulling it out.
Repeat these steps for the other section of the split
hench
swf
1-1
1
To Next Page
Loading...
