Playing
the
Radio
PWR
(Power):
Push this knob to turn the system on
and
off.
VOL (Volume):
Turn the knob to increase or to
decrease volume.
AUTO VOL (Automatic Volume):
Your system has a
feature called automatic volume. With this feature,
your audio system adjusts automatically to make up for
road and wind noise as you drive.
Set the volume at the desired level. Press this button to
select MIN, MED or MAX. Each higher setting will
allow for more volume compensation at faster vehicle
speeds. Then, as you drive, automatic volume increases
the volume, as necessary, to overcome noise at any
speed. The volume level should always sound the same
to
you as you drive.
If
you don’t want to use automatic
volume, select
OFF.
RCL
(Recall):
Push this knob to switch the display
between the radio station frequency and the time.
Pushing this knob with the ignition
off
will display
the time.
For XMTM (USA only, if your radio is equipped with XMTM
Satellite Radio Service), pressing this button while in
XMTM mode to retrieve various pieces of information
related to the current song or channel. By pressing and
releasing the RCL button, you may retrieve four different
categories of information: Artist, Song Title, Category or
PTY, Channel Number/Channel Name.
For DAB (Canada only, if your radio is equipped with
DAB), pushing this knob switches the display between
channel name and PTY name.
To change the default on the display, push the knob until
you see the display you want, then hold the knob until the
display flashes. The selected display will now be the
default.
3-89
To Next Page
Loading...
Need help?
General
