Setting
Preset PTYs
(RDS
Only)
The six numbered pushbuttons let you return to your
favorite PTYs. These buttons have factory PTY presets.
You can set up to
12 PTYs (six
FMI
and six
FM2)
by
performing the following steps:
1.
Press BAND to select FMl or
FM2.
2.
Press the P-TYPE button to activate program type
select mode.
3.
Turn the P-TYPE knob
to
select
a
PTY.
4. Press and
hold
one
of
the six numbered
pushbuttons until
you
hear a beep. Whenever you
press
that
numbered pushbutton,
the
PTY
you
set will return.
5.
Repeat the steps for each pushbutton.
RDS
and DAB
Messages
ALERT!: Alert warns of local or national emergencies.
When an alert announcement comes on the current
radio station, ALERT! will appear on the display. You will
hear the announcement, even if the volume is muted
or a compact disc is playing.
If
the compact disc player
is
playing, play will stop during the announcement.
You will not be able to turn
off alert announcements.
ALERT! will not be affected by tests of the emergency
broadcast system. This feature is not supported by
all RDS stations.
INFO
(Information):
If
the current station has a
message,
INFO
will appear on the display. Press this
butterr
to
see
ths
message;
The
message may display
the artist and song title, call in phone numbers, etc.
If
the whole message is not displayed, parts
of
it
will appear every three seconds. To scroll through the
message at your own speed, press the INFO button
repeatedly. A new group of words will appear on
the display with each press. Once the complete
message has been displayed, INFO will disappear from
the display until another new message is received.
The
old
message can be displayed by pressing
the INFO button until a new message is received or a
different station
is tuned to.
3-93
To Next Page
Loading...
Need help?
General
