The stowable seat has seat position labels, located on
the back of the seat, showing where the seat must go.
The seat must be placed in the proper location for the
legs
to
attach correctly.
Make sure that the seatback is folded forward before
beginning this procedure.
1.
Remove the nuts from the screws.
2.
Place the stowable seat on the vehicle floor
so
that
the brackets are placed over the screws.
3.
Reinstall the nuts back onto the screws. Torque to
approximately
18 lb ft
(25
Nom).
4.
Try
to raise the seat to make sure that
it
is
locked down.
5.
Raise the seatback to its upright position.
Push and pull on the seatback to make sure that it
is locked into place.
1-21
To Next Page
Loading...
Need help?
General
