Housing
Bypass
Tube
3.
After the engine cools, open the coolant air bleed
valves.
There are two bleed valves. One
is
located on the
thermostat housing. The other
is
located on the
thermostat bypass tube.
4.
Fill
the radiator with the proper DEX-COOL@
coolant mixture, up to the base of the filler
neck. See
Engine Coolant
on
page
5-22
for more
information about the proper coolant mixture.
If you see a stream
of
coolant coming from an air
bleed valve, close the valve. Otherwise, close
the valves after the radiator
is
tilled.
5.
Rinse or wipe any spilled coolant from the engine
and the compartment.
5-33
To Next Page
Loading...
Need help?
General
