The safety belt locks
if
there’s a sudden stop or a crash,
or
if
you pull the belt very quickly out of the retractor.
Each position next to the windows
in
the second row has
a shoulder belt height adjuster. Move the shoulder
belt adjuster to the height that is right for you.
To move it down, push down on the button and move
the height adjuster to the desired position. You can
move the height adjuster up just by pushing up on the
shoulder belt guide. After you move the adjuster to
where you want it, try to move it down without pushing
the button down to make sure it has locked into
position.
Adjust the height so that the shoulder portion
of
the
belt is centered on your shoulder. The belt should
be away from your face and neck, but not falling
off
your shoulder.
You
G-.)
be seriously hurt
..
jour shoulder belt
is
too loose.
In
a crash, you would move
forward too much, which could increase injury.
The shoulder belt should fit against your body.
E
To unlatch the belt, just push the button on the buckle.
1-41
To Next Page
Loading...
