From this screen, using the <Left arrow> / <Right arrow> buttons select the date, month, year, hour or
minute field.
Once you have selected the field you want to change, use the <Down Arrow> / <Up Arrow> buttons to
change the value.
After you are ready with the changes, press the <OK> button to confirm them.
If you do not want the changes to be saved, press the <MODE> or <HOME> button.
5.4.6.3. Temperature scale
To enter in "Temperature scale" menu, from the "Configuration" menu (see item 5.4.6.), select the "
Temperature scale" option using <Down arrow> / <Up arrow> buttons and then confirm with the <OK>
button.
A menu with supported temperature scales will appear on the display and the currently selected scale will be
marked.
Use <Down Arrow> / <Up Arrow> to select your prefered scale and then confirm with the <OK> button.
Your selection will be stored in the non-volatile memory of the device and will remain valid until the next
change.
If you do not want the changes to be saved, press the <MODE> or <HOME> button.
5.4.6.4. Pressure sensor
The device has a built-in precision atmospheric pressure sensor. The measured values from this sensor are
used in the "Measurement" mode to calculate the distilled water boiling temperature , which is needed to
calculate the percentage of alcohol in the sample (see item 1.4.)
This menu allows you to enable or disable the use of the pressure sensor.
To enter in "Pressure sensor" menu, from the "Configuration" menu (see item 5.4.6.), select the " Pressure
sensor" option using <Down arrow> / <Up arrow> buttons and then confirm with the <OK> button.
To Next Page
Loading...
