Bunn Axiom Series - Plumbing and Water Supply Requirements; Water Inlet Specifications; Initial Brewer Setup Procedure

Unit Objectives
Unit 2 setup
Given a realistic scenario depicting a new site install, the learner will be able to install and setup the brewer
for customer turnover without error.
Given an installed machine, all the necessary tools and safety equipment, the learner will be able to
set the machine up for initial operation.
The learner will be able to enter programming.
The learner will be able set the appropriate brew ounces.
  Thelearnerwillbeabletocalibratethesprayheadowrate.
The learner will be able to enable BrewLOGIC
®
and explain when it may be necessary.