AXIOM
®
Training Manual
8
Programming Menus
The programming menus for the AXIOM
®
are divided into three levels. Level 1, (BrewWIZARD
®
), allows for basic
brewing adjustments. Level 2 is used for more advanced brewing adjustments in addition to supporting service and
diagnosticfunctions.Thenallevelofprogramming,Level3,iswhereyoucanndadvancedscreenssuchas;Cal
Temperature, Lime Adjust, and Calibrate LP1-LP2.
While in programming you may exit and save any changes you have made by pressing and releasing the Enable On/
Off switch located on the front panel.
Level 1 Programming (BrewWIZARD
®
)
Press and hold the right hidden switch until the screen reads Brew Lockout? to enter programming.
This function will lockout an operator if a predetermined temperature has not been
achieved message will read “Brew temp to low please wait heating”.
This function allows the operator to adjust the brew volumes for the various sizes of
holding vessels.
This function allows the operator to adjust the brew strength/extraction time setting 1 is
non pulse setting, 14 being the highest setting using pulse brew.
This screen allows the operator to utilize the screen for advertising; a tag card can be
programmed with a message.
This function allows the operator to enter in a telephone number to call if service is
needed. This number will be displayed anytime a fault message appears.
This display is a prompt to advise you that you are exiting Level 1 programming.
Level 2 Programming
Level 2 programming can only be accessed by scrolling through Level 1 programming.
This function allows the operator to enter a 3 digit code to password protect Level 2
programming.
This function allows the operator to set a 3 digit code to password protect Level 2
programming.
This function allows the operator to choose between English, Spanish and French.
This function allows the operator to choose between English or Metric.
BREW LOCKOUT ?
NO YESDONE
BREW OZ: 64.0
(-) (+)DONE
BREW METER 3
- +
ENABLE ADS ?
NO YESDONE
ENTER SERVICE # ?
NO YES
EXITING
BrewWIZARD
ENTER PASSWORD
0 00
SET PASSWORD
0 00
SET LANGUAGE
NO YES
UNITS
METRIC ENG DONE