50
c. If Upper Door is not open, raise now
for access.
c
6. The screen will now show steps needed to wash
and re-install the Swiper.
Close-ups of steps.
a. Wash and rinse the top of the Swiper
assembly.
b. Wash and rinse the bottom of the Swiper
assembly.
a
b
CARE AND CLEANING
d. Install Swiper making sure it fully latches
(clicks).
d
NOTE: If Swiper is not found after pressing Next
button, machine will position the piston and ask
you to install again.
Weekly Cleaning
(Every 3 Weeks)
(continued)
To Next Page
Loading...
