Bunn Fast Cup - Machine Care and Cleaning; Cleaning Supplies and Preparation; Surface Cleaning Procedures; Accessing Cleaning Functions

40
CARE AND CLEANING
Interior and Exterior Surfaces
• Do not use any abrasive materials.
• Use a soft, dry cloth to wipe down the exterior
surfaces of the dispenser to maintain the luster
of the stainless steel finish.
• Wash the stainless steel interior surfaces of
the dispenser with warm, soapy water. Rinse
with warm, clear water. If the water is hard,
wipe the dispenser dry with a soft cloth to
prevent spotting.
• Use cleaning cloth provided, to clean the
acrylic door panel.
General
The use of a damp cloth rinsed in any mild,
non-abrasive, liquid detergent is recommended for
cleaning all surfaces on Bunn-O-Matic equipment.
Supplies
Cleaning supplies included with machine:
Brush (PN 47745.0000) and Microfiber Cloth
(PN 53465.0000) for touchscreen cleaning,
Cleaning Tube (PN 48236.1001) and
Tabz™ coffee equipment cleaning tablets.
(120 tablets, PN 39637.0000)
Accessing Care and Cleaning
1. Touch and hold the BUNN logo for a
few seconds until the SERVICE ACCESS
screen appears.
2. From the SERVICE ACCESS screen, press
the CARE AND CLEANING button.
1
2