4
ABOUT THE ARC PLUS SYSTEM
The ARC Plus SL that you purchased is part of an integrated system of
products that work together to provide just the right balance of
capabilities for many different types and styles of operations. As
requirements dictate, the ARC Plus system can be reconfigured easily.
ARC PLUS MODELS
ARC Plus refers to the ARC Plus product line in general as well as to
the previous model unit of the same name. The ARC Plus SL is the
slimline version of the ARC Plus with no front panel.
This manual applies to ARC Plus SL version 5 which includes changes
in both hardware and firmware from version 2 or 3. Installation of
version 5 firmware or above can only be done on version 5
hardware.
Compatible software includes AutoLoad Plus, described here, and AutoPilot®, covered in a separate manual. The
comparison chart below will help you determine which model you have.
Notes:
The ARC Plus SL is covered in the ARC Plus manual (v.2 or v.3), or the ARC Plus SL Version 5 manual as appropriate.
Interface to analog and status inputs and command outputs is done through Plus-X units while direct transmitter
interface can be done through PlusConnect units available for select transmitters. All I/O units are described in
To Next Page
Loading...