Burk ARC Plus SL - Status SPEECH Labels; Commands; Momentary or Latching Relays; Command Duration

70
STATUS SPEECH LABELS
The ARC Plus SL can store speech labels that are called out by a networked ARC Plus configured with ESI or RSI.
COMMANDS
To configure command channels, select the Commands tab.
MOMENTARY OR LATCHING RELAYS
All ARC Plus SL relays can be configured as either momentary or latching. Make this selection under the Command
Type heading. Momentary relays are energized for the duration configured under the Command Duration
heading. Latching channels are energized until the opposing relay is activated (i.e. when a channel is latched in the
“raise” state, the raise relay is energized until the lower relay is activated).
COMMAND DURATION
The command duration setting determines the pulse duration for a momentary command.