Type 2000
General information
english
7
▶ Do not make any changes to the device and do not subject it
to mechanical stress.
▶ Feed only those media, which are listed in the chapter "Tech-
nical data", into the medium ports.
▶ Operate the device only in perfect state and in consideration
of the operating instructions.
▶ For applications planning and operation of the device, ob-
serve the plant-specific safety regulations.
▶ Observe the general rules of technology.
▶ The plant owner is responsible for the safe operation and
handling of the plant.
To protect the environment, observe the following:
▶ The pilot exhaust air of the device may be contaminated by
lubricants.
4 GENERAL INFORMATION
4.1 Contact address
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13−17
D-74653 Ingelfingen
Phone: + 49 (0) 7940 - 10 91 111
Fax: + 49 (0) 7940 - 10 91 448
E-mail: info@burkert.com
International
The contact addresses can be found on the back pages of the
printed Quickstart. Also on the Internet at: http://www.burkert.com
4.2 Warranty
A precondition for the warranty is that the device is used as inten-
ded in consideration of the specified usage conditions.
4.3 Information on the Internet
Operating instructions and data sheets for the Bürkert products
can be found online at:
https://www.burkert.com/en
To Next Page
Loading...
Need help?
General
