Burkert 2000 Quick Start

Type 2000
Technical data
english
8
5 TECHNICAL DATA
5.1 Conformity
The device conforms to the EC directives as per the EC Declara-
tion of Conformity (if applicable).
5.2 Standards
The applied standards, which are used to demonstrate conform-
ity with the directives, are listed in the EU type examination certi-
ficate and/or the EU Declaration of Conformity (if applicable).
5.3 Type label
Control function
Manufacture code (coded)
Type
Seal material
Flow coefficient
Order number
Medium pressure
Medium temperature
For derating, please refer to the
operating instructions.
Flow direction
Fig.1: Example of a type label
5.3.1 Designation of the actuator size
Actuator size [mm] Designation
ø40 C
ø50 D
ø63 E
ø80 R
ø100 G
ø125 H
Tab.1: Designation of the actuator size
5.4 Operating conditions
Degree of protection IP67 according to IEC 529 / DIN EN
60529
Flow media Water, alcohols, oils, fuels, hydraulic
fluids, saline solutions, lyes, organic
solvents, vapour, air, neutral gases
Control media Neutral gases, air
Sound pressure level <70dB(A)
The sound pressure level may be
higher depending on the usage condi-
tions

Burkert 2000 Specifications

General

Model	2000
Manufacturer	Burkert
Ambient Temperature	-10 to +60 °C
Protection Class	IP65
Operating Temperature	-10 to + °C
Seal Material	FKM
Operating Pressure	0- bar
Fluid Temperature	-10 to + °C